Section: Main / NURSE CALL SYSTEM / NURSE CALL SYSTEM " HostCall-CMP" / Room equipment with call radio buttons
Installed inside a ward next to the entrance door.
Functions:
Calling a doctor from the ward,
Indication of staff presence in the ward,
Resetting a call. Wall mounted. Effective distance up to 20 meters.
Dimensions: 83x83x18 mm.
Designed for calling nurses from a bathroom. Connects to an MP-211W2 wireless controller.
Nice ergonomic handle at the end of the cord.
IP44 water proofing.
The cord is 1.5 meters long.
Sound and light indication to confirm that a call has gone through.
Distance of up to 20 meters.
Dimensions: 83x83x18 mm.
Wireless adapter for interfacing with third party systems and equipment.
Designed to allow connection of the ward alarm system to third party devices.
Dry contacts of third party sensors are connected with 3.5 mm stereo jack.
Dimensions: 83x83x18 mm.
A remote button that is attached to a twisted cord, may be installed on a wall-mounted holder and can be used as a nurse call button by bedridden patients.
Connects to an MP-211W2 wireless controller.
Up to 5 call buttons per ward.
Sound and light indication to confirm that a call has gone through.
Distance of up to 20 meters.
Dimensions: 80x107x34 mm.
Controllers are installed outside a ward and designed to receive signals from wireless buttons inside the ward.
Functions:
Showing calls from MP-412W1, MP-413W1, MP-414W1, and MP-413W wireless buttons,
Transmitting signals and commands to the nurses' station via the RS-485 interface,
Ward lamp can display the following:
Nurse call in red,
Doctor call in blue,
Staff presence in the ward in green.
Dimensions 122х92х72 mm.
The MP-030C1 programmer is designed for convenient assignment of radio button numbers using a personal computer.
Not produced
Controllers are installed outside a ward and designed to receive signals from wireless buttons inside the ward.
Functions:
Showing calls from MP-412W1, MP-413W1, MP-414W1, and MP-413W wireless buttons,
Transmitting signals and commands to the nurses' station via the RS-485 interface,
Ward lamp can display the following:
Nurse call in red,
Doctor call in blue,
Staff presence in the ward in green.
Dimensions 83x83x62 mm.
