Lamps are installed in the corridor above the ward doors and serve to inform the staff on what is going on in the ward.
Connected to an MP-331W1 ward console.

Ward lamp can display the following:

Nurse call in red,

Doctor call in blue,

Staff presence in the ward in green.

A remote button that is attached to a twisted cord, may be installed on a wall-mounted holder and can be used as a nurse call button by bedridden patients.
Connected to an MP-331W1 ward console.
Up to 5 call buttons per ward.
Sound and light indication to confirm that a call has gone through.
May be connected to MP-522W1 communication units.
Dimensions: 80x107x34 mm.

Installed in the ward next to the entrance door and has the following functions:

Status monitoring and indication of: MP-432W1 and MP435W2 call buttons, MP-433W1 bathroom call buttons, MP-522W1 intercom systems,

Transmitting signals and commands to the nurses' station via the RS-485 interface,

Controlling the light intensity of MP-611W1 corridor lamps.

Doctor call, presence and reset buttons are positioned in the center of the front panel.

Wall mounted (vertical or horizontal).

Dimensions 165х101х29 mm.

A remote button that is attached to a twisted cord, may be installed on a wall-mounted holder and can be used as a nurse call button by bedridden patients.

Connected to an MP-331W1 ward console.

Up to 5 call buttons per ward.

Sound and light indication to confirm that a call has gone through.

May be connected to MP-522W1 communication units.

Dimensions: 80x107x34 mm.

Designed for calling nurses from a bathroom. Connected to an MP-331W1 ward console.

Nice ergonomic handle at the end of the cord.

IP44 water proofing.

The cord is 1.5 meters long.

Sound and light indication to confirm that a call has gone through.

Dimensions: 83x83x18 mm.

A button with an easy-to-use rubber ball that the patient can squeeze to send a call.

Connected to an MP-331W1 ward console.

Pneumatic buttons are perfect for use by critically ill patients in medical treatment rooms (treatment baths), etc.

Pneumatic buttons come with a cord of up 2 meter long.

IP44 water proofing.

Up to 5 call buttons per ward.

Up to 2 call buttons per bathroom.

Sound and light indication to confirm that a call has gone through.

Dimensions: 83x83x18 mm.

The MP-433W8 water-proof wired digital call button is designed to call personnel from the bathroom room. The product is designed to work as part of various personnel call systems (hospital systems, personnel call systems for the disabled, etc.)